Anderson Pens Micro-Gloss #1 Polishing Solution (1 oz bottle)

( 9 Reviews )

Current stock: 0

Micro-Gloss Liquid Abrasive is one of the most versatile products you will ever use! This very concentrated formulation is used as the final step of our finishing procedures to not only remove any residual fine surface scratches, but to also polish to a high gloss.

Being a water-base formulation, Micro-Gloss is environmentally safe and friendly. This product contains a 1 micron abrasive crystal that works to remove fine damage. Most cleaners and polishes contain products that can damage surfaces over time. Micro-Gloss #1 does not!

Micro-Gloss can be used on any plastic, wood, coatings, metal, and composite surfaces to give it that ultra smooth and shiny mirror finish. It takes a nice finish and makes it a wow finish!

A one ounce bottle of Micro-Gloss #1 liquid polish. For superficial damage repair on acrylic surfaces. Clean surface with water or damp cloth first. Apply Micro-Gloss to surface. Rub briskly with cloth for 2 to 3 minutes or until Micro-Gloss disappears. Repeat application on any area not satisfactorily restored. For a more slightly more abrasive polish start with Micro-Gloss #5 first, then follow with Micro-Gloss #1. Shake well before use.

9 Reviews

Kyle Albarado Feb 26, 2021


Great polish for pens.

Walter Jun 23, 2020

Micro-Gloss #1 AND #5

Fountain pen ( not homework) chewed by dog. Used 12,000 and 15,000 grit sand paper to start than
applied Micro-Gloss # 5 three times. I thought i would never get down to an acceptable shine. I gave up
and two days later I applied the Micro-Gloss # 1 After a minute of rubbing, the pen shown like new.
Great stuff! Listen to the experts and you won't go wrong,

Add a Review